AMCA再现江湖,三锅的五代机又有新进展,颤抖吧

来源:百度文库 编辑:超级军网 时间:2024/05/04 02:09:06
看来三锅这回是下定决心了,已经开始做流体动力研究了

Livefist: Config Studies Of India's 5th Gen AMCA Commence



Computational fluid dynamics-based
aerodynamic configuration studies of India's fifth
generation Advanced Medium Combat
Aircraft began recently -- this grab is from one
of the routines at the National Aerospace
Laboratory (NAL) in Bangalore where the studies
are being carried out.看来三锅这回是下定决心了,已经开始做流体动力研究了

Livefist: Config Studies Of India's 5th Gen AMCA Commence

amca cdf.jpg (77.61 KB, 下载次数: 1)

下载附件 保存到相册

2011-11-27 13:57 上传



Computational fluid dynamics-based
aerodynamic configuration studies of India's fifth
generation Advanced Medium Combat
Aircraft began recently -- this grab is from one
of the routines at the National Aerospace
Laboratory (NAL) in Bangalore where the studies
are being carried out.
吓尿了,阿三V5
风洞不够啊,咋办。。。
三锅说你造谣,从来就木有退隐过浆糊
可是这是早期的方案啊,现在的AMCA已经有了浓浓的T-50的味道了
咋一看还以为下面那个是22呢
LantianYY 发表于 2011-11-27 14:14
可是这是早期的方案啊,现在的AMCA已经有了浓浓的T-50的味道了
三锅比毛子心气高,人家要搞加莱特进气道
aimarraul 发表于 2011-11-27 14:20
三锅比毛子心气高,人家要搞加莱特进气道
你完了,敢影射T-50不是Caret,毛粉已启动跨国程序
卡佛里发动机项目不是取消了吗
那个AMCA有什么用
那个,膜拜是不足以表达的……
这流线
下一个30年三哥都有活动的了
是否还要研制30年?
看来阿三画图和搞飞机模型的能力还是不错的,但要做出来不知是到哪个年代。现在它的LCA二代+的还没搞好呢。
机头线条太恶心了
前面那个模型好丑
caidian 发表于 2011-11-27 14:35
卡佛里发动机项目不是取消了吗
那个AMCA有什么用
但是三哥跟斯奈克玛合作的卡佛里Ⅱ又开始了,再说还可以买F414或EJ200嘛
神器,不可战胜!
颤抖吧TG,三哥的无敌空天战机2100年将要统治银河系!
这个,有三五人的CFD小公司,就可以做了吧?估计干了不少curve-fitting的事儿。
LantianYY 发表于 2011-11-27 15:04
但是三哥跟斯奈克玛合作的卡佛里Ⅱ又开始了,再说还可以买F414或EJ200嘛
三哥跟斯奈克玛合作的卡佛里Ⅱ

-===

有出处否?
坐等阿三六代现身

JSTCVW09CD 发表于 2011-11-27 15:58
三哥跟斯奈克玛合作的卡佛里Ⅱ

-===
维基百科上就有啊:http://en.wikipedia.org/wiki/GTRE_GTX-35VS_Kaveri
“In June 2010, the Kaveri engine based on Snecma’s new core, an uprated derivative of the M88-2 engine that powers the French Rafale fighter, providing 83-85 Kilonewtons (KN) of maximum thrust is being considered an option by DRDO.[18]”
原来的卡佛里现在发展成了了燃气轮机,现在的新卡佛里是基于M88-2的核心机
pf_zhong 发表于 2011-11-27 14:06
风洞不够啊,咋办。。。
大嘴一张就吹出来了
或者说,是我搞错了这玩意儿不应该叫“卡佛里Ⅱ”?
LantianYY 发表于 2011-11-27 16:10
维基百科上就有啊:http://en.wikipedia.org/wiki/GTRE_GTX-35VS_Kaveri
“In June 2010, the Kaveri en ...
is being considered an option by DRDO

=

大锅, 这个是不确定的事情。
可是这是早期的方案啊,现在的AMCA已经有了浓浓的T-50的味道了
…好吧,我承认第一张不是T50…第二张不是爱抚娘娘
我好怕怕呀
JSTCVW09CD 发表于 2011-11-27 16:15
is being considered an option by DRDO

=
DRDO in talks with SNECMA on JV of Kaveri Engine, IAF clears engine specs
Defence Research and Development Organisation (DRDO) is negotiating with M/s SNECMA, France for co-development and co-production of Kaveri Aero Engine for the Light Combat Aircraft (LCA) Tejas Mk-II.

Indian Air Force (lAF) has been consulted at every stage and is part of negotiation for the co-development of Kaveri engine. The draft engine technical specification has been examined and cleared by IAF and has further suggested that the engine design should have minimal impact on the LCA, Tejas airframe for future retro-fitment.

This information was given by Defence Minister Shri AK Antony in written reply to Shri Nand Kumar Saiin Rajya Sabha today.
那也快差不多了吧……
看上去还行,就是不知道整体座舱盖能不能做出来
LantianYY 发表于 2011-11-27 16:26
DRDO in talks with SNECMA on JV of Kaveri Engine, IAF clears engine specs
Defence Research and De ...
最近的消息有没有。 那个不靠谱啊。
JSTCVW09CD 发表于 2011-11-27 16:39
最近的消息有没有。 那个不靠谱啊。
这个就是本月23号的消息啊?哪儿不靠谱了
http://idrw.org/?p=5405#more-5405
LantianYY 发表于 2011-11-27 16:49
这个就是本月23号的消息啊?哪儿不靠谱了
http://idrw.org/?p=5405#more-5405
没最终合同就是没定下来呗。
...难道50不是加莱特么..= =
幽默任意求 发表于 2011-11-27 16:36
看上去还行,就是不知道整体座舱盖能不能做出来
三哥可以全花钱买,然后贴牌
A3先搞定推重比10的发动机,再谈AMCA
bizhu886 发表于 2011-11-27 17:49
A3先搞定推重比10的发动机,再谈AMCA
1. 三哥会计划推重比12的,表示讲要开始研究推重比15的。
2. 三哥会和毛子合资,三哥出钱毛子出货,搞10的,然后三哥号称国产。
三锅的研制过程大体上是抹点神油,嘴一吹,风洞就省下了
不得不说,即便模型,也欠缺美感;
比上回露面被误认为沈飞四代的模型差远了!
JSTCVW09CD 发表于 2011-11-27 16:39
最近的消息有没有。 那个不靠谱啊。
消息?
你省省吧
99M2的消息那里的? 有准没?
三哥的航母进度表呢?有准没?

省一点吧