超级军网(已解决~~)求此战车的型号及详细情况~~
来源：百度文库 编辑：超级军网 时间：2024/04/29 22:11:12
如题,最近看到的一副彩色老照片,貌似以前也见过,但是没有留意到战车的型号,看武备应该是美军的,貌似是二战时研发的,不知道型号,更不知道研制背景和车辆的详细情况了,所以还请各位帮忙给认认~~~
如题,最近看到的一副彩色老照片,貌似以前也见过,但是没有留意到战车的型号,看武备应该是美军的,貌似是二战时研发的,不知道型号,更不知道研制背景和车辆的详细情况了,所以还请各位帮忙给认认~~~
CTL3M?
T16？？？
确实是T16～～～
The tanks were actually Marmon Herrington Type CTLS-4TAC or 4TA. The US Army designation for this vehicle was T16, but as far as can be ascertained this designation was never used in Australia. The vehicles were built by the Marmon Herrington Company of Indiana. The tank was of conventional design , having the engine, a Hercules 6 cylinder petrol engine, at the rear and a fighting compartment with octagonal turret which mounted a .30 inch Colt machine gun. The weapons were described in an Army Report late in 1942 as “Browning type .30 MG manufactured commercially by Colt and known as MG 38 BT Tank Model “.
The turret was offset to either the right or left side of the vehicle. The driver’s compartment was located alongside the turret. A mount in the driver's compartment could also be fitted with a machine gun. The hull and turret were of bolted construction with the maximum armour thickness being 12 mm. The turret had a restricted traverse of 270 degrees. The vehicles were designed to operate in pairs, hence the turret offset.
The front driving sprocket was high mounted, as was the rear idler. Two bogie units, each of the vertical volute spring design and mounting two bogie wheels were mounted on each side of the hull. Each bogie unit mounted a track skid on the top and a single return roller was mounted between the bogie units on the hull. A single exhaust muffler was mounted on the trackguard on the left rear of the vehicle and pioneer tools were stowed in a rack on the rear hull plate. Provision for mounting spare track links was made on both the front and rear lower hull plates.
Technical details of the vehicles are as follows:
Length 11 ft 10 ins
Engine Hercules 6 cylinder Petrol developing 118 bhp at 3500 rpm
Width 6 ft 11 1/2 ins
Height 6 ft 11 ins
Weight 8 1/2 tons
Speed 30 mph
Crew 2
The turret was offset to either the right or left side of the vehicle. The driver’s compartment was located alongside the turret. A mount in the driver's compartment could also be fitted with a machine gun. The hull and turret were of bolted construction with the maximum armour thickness being 12 mm. The turret had a restricted traverse of 270 degrees. The vehicles were designed to operate in pairs, hence the turret offset.
The front driving sprocket was high mounted, as was the rear idler. Two bogie units, each of the vertical volute spring design and mounting two bogie wheels were mounted on each side of the hull. Each bogie unit mounted a track skid on the top and a single return roller was mounted between the bogie units on the hull. A single exhaust muffler was mounted on the trackguard on the left rear of the vehicle and pioneer tools were stowed in a rack on the rear hull plate. Provision for mounting spare track links was made on both the front and rear lower hull plates.
Technical details of the vehicles are as follows:
Length 11 ft 10 ins
Engine Hercules 6 cylinder Petrol developing 118 bhp at 3500 rpm
Width 6 ft 11 1/2 ins
Height 6 ft 11 ins
Weight 8 1/2 tons
Speed 30 mph
Crew 2
回复 5# sunlibo1986
T16 轻型支援坦克 1927年被定型 布尔什维克工厂试制；用于支援步兵作战，皮薄馅小跑的快，
这么说对不？{:3_86:}
T16 轻型支援坦克 1927年被定型 布尔什维克工厂试制；用于支援步兵作战，皮薄馅小跑的快，
这么说对不？{:3_86:}
lazyboy07 发表于 2010-2-16 23:27 
马尔蒙-赫灵顿公司的 跟苏毛有毛关系···
马尔蒙-赫灵顿公司的 跟苏毛有毛关系···
lazyboy07 发表于 2010-2-16 23:27
两回事
彼T-16是布尔什维克厂仿造雷诺FT-17轻型坦克试制的样车
该方案正式名称为“1927年式MS-1坦克”
T-16的问题重重最后放弃
后来在此基础上的成熟型号为T-18
两回事
彼T-16是布尔什维克厂仿造雷诺FT-17轻型坦克试制的样车
该方案正式名称为“1927年式MS-1坦克”
T-16的问题重重最后放弃
后来在此基础上的成熟型号为T-18
回复 9# 万字军骑士
谢谢 ，{:3_83:} 没见过T16 的图，记不得在哪里看到的内容说苏联那个比T18少对负重轮，先仿菲亚特，后仿雷诺，不成功，好像后来那个设计师还被处分了……
谢谢 ，{:3_83:} 没见过T16 的图，记不得在哪里看到的内容说苏联那个比T18少对负重轮，先仿菲亚特，后仿雷诺，不成功，好像后来那个设计师还被处分了……
lazyboy07 发表于 2010-2-16 23:51
关于T-16的负重轮数量我也不清楚
不过T-18可是有负重轮六对和七对的型号差别的
因为其至少有1927年型和1930年型两种型号
关于T-16的负重轮数量我也不清楚
不过T-18可是有负重轮六对和七对的型号差别的
因为其至少有1927年型和1930年型两种型号
谢谢楼上的诸位兄弟帮忙,看来那个图片中的轻型坦克确实是T16了,不过根据图片来看,貌似这个T16的悬挂高度是可调的?