超级军网[转帖]Magpul Masada特战步枪新图
来源：百度文库 编辑：超级军网 时间：2024/05/02 16:03:38
战国时代-------------------SMGLee
2007 Shot Show kicked off the New Year with a bang from MagPul. The team of hard working crew at MagPul put together a new rifle within a 3 months time spam at the cost of less then 70k. The Masada was hit within the Law enforcement section, bring record crowd to the MagPul booth for the entire length of the show. Rich at MagPul will admit first that the new rifle are still a full year away from production and they will work to get it to the market unless a much larger company with more resources to take the project under their wings.
The Masada is only a code name, but this rifle not only brought a fresh air to the clustered AR market, but also show the capability of a smaller company to produce a weapon that can compete with the big boys with a budget that seem minuscule compare to the what some of the price it cost the military to bring in new weapon system. The Masada started with a machined aluminum receiver which is the serialized part. This machined receiver has a continuous rail that extends all the way to the integrated folding front sight. The front sight uses a standard M16 front post. The front sight deploys manually but requires a push of a button to fold it back down. Masada has what is in vogue right now, which is a quick change barrel with the capability for multiple calibers within one system. A harden barrel trunnion is at this time screwed into the receiver with interrupted threads much like what you would find on an artillery piece. This harden piece will ensure longevity with the barrel to trunnion interface under heavy use. The barrel of the Masada is a standard M4 affair, but with modified pieces to fit the quick change barrel locking collar and also the gas piston. In the production model, the Masada will feature an adjustable gas port where now an Allen screw resides for research to determine the proper gas port size.
Since the Masada receiver is the serialized part of the weapon, the lower trigger housing is a polymer non-impact component which contains the ambidextrous magazine release, bolt release and also the trigger group. The stock of the Masada is attached to the trigger housing by a captured pin. This method of componentry ensures the modularity of the weapon system. An operator can select a range of different stock option to best fit the mission perimeter. Currently a PRS style stock is part of the SPR offering. Back to the trigger housing, Rich and I discussed some of the short comings of the M16 selector and he stated the current selector design are something he is not satisfied with, it remain one of the biggest weak point of his Masada design. A future development of the selector will be forth coming to possibly alter the rotation of the selector to make it more ergonomic to the operator. The ability to incorporate the M16 trigger system means an operator in country can easily find trigger components such as pins and springs to supplement this weapon without having to find logistic in a remote battle field.
The Masada stock is nice touch with wide range of adjustability. The stock will fold much like the FN SCAR to reduce size for transport and also adjust for length of pull to best fit someone with armor. The cheek piece is also adjustable with two different heights. The folding mechanism utilizes a spring to retain the stock while it is folded and a latch to secure the stock while it is extended. A recoil buffer can be fitted to the stock if necessary. The stock as mentioned before it independent from the trigger housing.
With is modularity, the system can go from 5.56 to 5.45 with a simple change of the trigger housing, bolt carrier group and also the barrel. Currently a 5.56, 5.45, 6.8 are scheduled for this version. A possible development of the 7.62x51 and 7.62 x 39 are in the future but with various project under work, MagPul has no time table to those calibers as of yet. The 5.45 trigger housing will have a thumb lever release without the bolt held open release, but the 5.56 and the future 6.8 will have the ambidextrous magazine release and also the bolt held open release. The bolt held open device is a lot like the XM8 or even the older FN FAL. It is right where your finger is at and it is easily manipulated.
Masada will be a piston driven unit, with the piston system as part of a self contain unit with the barrel. If you change the caliber, you do not have to worry about changing piston, each barrel will have its own piston much like the SCAR.
Here is an interesting part of the Masada. The trunnion has two harden steel rails riveted to it. Those two rails are then riveted into the aluminum receiver. The Bolt carrier travels on the steel rail to create a steel to steel interface. This interface yields the smoothest bolt travel in the industry. The design of the trunnion and the rail also ensure under heavy use, the heat transfer will not affect accuracy like what happened with the XM8. With the rail firmly secured to the receiver, it will make sure the trunnion will not be able to shift in the aluminum receiver under extreme heat.
The bolt carrier is much like the G36 or the SCAR. But the charging handle are interchangeable for right or left. A runner that secures the charging handle also locks into the bolt carrier to engage it for chambering a round or it can be used for malfunction clearance. The non-receptacle charging handle can be locked in to act as a forward assist.
A new rail system is also optional for those that require accessories to be attached to the Masada. The rail system retains the free float of the barrel and has sling swivel attachment points build in on both side.
MagPul has a few things to figure out like the recoil spring rate, piston setup, manufacturing process and sub-contractors. I think the more MagPul is having to answer calls and reply e-mails, the less time they would have to work on the rifle. They already know how well received this rifle has been, let's give them time to get this to the market.
Masada is a project that may grow larger then what MagPul can contain, this little monster that awe the show goers will no debut be the focus of may in the up coming year.
Here are some more photos of the gun taken during a trip to Colorado this past week.
战国时代-------------------SMGLee
2007 Shot Show kicked off the New Year with a bang from MagPul. The team of hard working crew at MagPul put together a new rifle within a 3 months time spam at the cost of less then 70k. The Masada was hit within the Law enforcement section, bring record crowd to the MagPul booth for the entire length of the show. Rich at MagPul will admit first that the new rifle are still a full year away from production and they will work to get it to the market unless a much larger company with more resources to take the project under their wings.
The Masada is only a code name, but this rifle not only brought a fresh air to the clustered AR market, but also show the capability of a smaller company to produce a weapon that can compete with the big boys with a budget that seem minuscule compare to the what some of the price it cost the military to bring in new weapon system. The Masada started with a machined aluminum receiver which is the serialized part. This machined receiver has a continuous rail that extends all the way to the integrated folding front sight. The front sight uses a standard M16 front post. The front sight deploys manually but requires a push of a button to fold it back down. Masada has what is in vogue right now, which is a quick change barrel with the capability for multiple calibers within one system. A harden barrel trunnion is at this time screwed into the receiver with interrupted threads much like what you would find on an artillery piece. This harden piece will ensure longevity with the barrel to trunnion interface under heavy use. The barrel of the Masada is a standard M4 affair, but with modified pieces to fit the quick change barrel locking collar and also the gas piston. In the production model, the Masada will feature an adjustable gas port where now an Allen screw resides for research to determine the proper gas port size.
Since the Masada receiver is the serialized part of the weapon, the lower trigger housing is a polymer non-impact component which contains the ambidextrous magazine release, bolt release and also the trigger group. The stock of the Masada is attached to the trigger housing by a captured pin. This method of componentry ensures the modularity of the weapon system. An operator can select a range of different stock option to best fit the mission perimeter. Currently a PRS style stock is part of the SPR offering. Back to the trigger housing, Rich and I discussed some of the short comings of the M16 selector and he stated the current selector design are something he is not satisfied with, it remain one of the biggest weak point of his Masada design. A future development of the selector will be forth coming to possibly alter the rotation of the selector to make it more ergonomic to the operator. The ability to incorporate the M16 trigger system means an operator in country can easily find trigger components such as pins and springs to supplement this weapon without having to find logistic in a remote battle field.
The Masada stock is nice touch with wide range of adjustability. The stock will fold much like the FN SCAR to reduce size for transport and also adjust for length of pull to best fit someone with armor. The cheek piece is also adjustable with two different heights. The folding mechanism utilizes a spring to retain the stock while it is folded and a latch to secure the stock while it is extended. A recoil buffer can be fitted to the stock if necessary. The stock as mentioned before it independent from the trigger housing.
With is modularity, the system can go from 5.56 to 5.45 with a simple change of the trigger housing, bolt carrier group and also the barrel. Currently a 5.56, 5.45, 6.8 are scheduled for this version. A possible development of the 7.62x51 and 7.62 x 39 are in the future but with various project under work, MagPul has no time table to those calibers as of yet. The 5.45 trigger housing will have a thumb lever release without the bolt held open release, but the 5.56 and the future 6.8 will have the ambidextrous magazine release and also the bolt held open release. The bolt held open device is a lot like the XM8 or even the older FN FAL. It is right where your finger is at and it is easily manipulated.
Masada will be a piston driven unit, with the piston system as part of a self contain unit with the barrel. If you change the caliber, you do not have to worry about changing piston, each barrel will have its own piston much like the SCAR.
Here is an interesting part of the Masada. The trunnion has two harden steel rails riveted to it. Those two rails are then riveted into the aluminum receiver. The Bolt carrier travels on the steel rail to create a steel to steel interface. This interface yields the smoothest bolt travel in the industry. The design of the trunnion and the rail also ensure under heavy use, the heat transfer will not affect accuracy like what happened with the XM8. With the rail firmly secured to the receiver, it will make sure the trunnion will not be able to shift in the aluminum receiver under extreme heat.
The bolt carrier is much like the G36 or the SCAR. But the charging handle are interchangeable for right or left. A runner that secures the charging handle also locks into the bolt carrier to engage it for chambering a round or it can be used for malfunction clearance. The non-receptacle charging handle can be locked in to act as a forward assist.
A new rail system is also optional for those that require accessories to be attached to the Masada. The rail system retains the free float of the barrel and has sling swivel attachment points build in on both side.
MagPul has a few things to figure out like the recoil spring rate, piston setup, manufacturing process and sub-contractors. I think the more MagPul is having to answer calls and reply e-mails, the less time they would have to work on the rifle. They already know how well received this rifle has been, let's give them time to get this to the market.
Masada is a project that may grow larger then what MagPul can contain, this little monster that awe the show goers will no debut be the focus of may in the up coming year.
Here are some more photos of the gun taken during a trip to Colorado this past week.
2007 Shot Show kicked off the New Year with a bang from MagPul. The team of hard working crew at MagPul put together a new rifle within a 3 months time spam at the cost of less then 70k. The Masada was hit within the Law enforcement section, bring record crowd to the MagPul booth for the entire length of the show. Rich at MagPul will admit first that the new rifle are still a full year away from production and they will work to get it to the market unless a much larger company with more resources to take the project under their wings.
The Masada is only a code name, but this rifle not only brought a fresh air to the clustered AR market, but also show the capability of a smaller company to produce a weapon that can compete with the big boys with a budget that seem minuscule compare to the what some of the price it cost the military to bring in new weapon system. The Masada started with a machined aluminum receiver which is the serialized part. This machined receiver has a continuous rail that extends all the way to the integrated folding front sight. The front sight uses a standard M16 front post. The front sight deploys manually but requires a push of a button to fold it back down. Masada has what is in vogue right now, which is a quick change barrel with the capability for multiple calibers within one system. A harden barrel trunnion is at this time screwed into the receiver with interrupted threads much like what you would find on an artillery piece. This harden piece will ensure longevity with the barrel to trunnion interface under heavy use. The barrel of the Masada is a standard M4 affair, but with modified pieces to fit the quick change barrel locking collar and also the gas piston. In the production model, the Masada will feature an adjustable gas port where now an Allen screw resides for research to determine the proper gas port size.
Since the Masada receiver is the serialized part of the weapon, the lower trigger housing is a polymer non-impact component which contains the ambidextrous magazine release, bolt release and also the trigger group. The stock of the Masada is attached to the trigger housing by a captured pin. This method of componentry ensures the modularity of the weapon system. An operator can select a range of different stock option to best fit the mission perimeter. Currently a PRS style stock is part of the SPR offering. Back to the trigger housing, Rich and I discussed some of the short comings of the M16 selector and he stated the current selector design are something he is not satisfied with, it remain one of the biggest weak point of his Masada design. A future development of the selector will be forth coming to possibly alter the rotation of the selector to make it more ergonomic to the operator. The ability to incorporate the M16 trigger system means an operator in country can easily find trigger components such as pins and springs to supplement this weapon without having to find logistic in a remote battle field.
The Masada stock is nice touch with wide range of adjustability. The stock will fold much like the FN SCAR to reduce size for transport and also adjust for length of pull to best fit someone with armor. The cheek piece is also adjustable with two different heights. The folding mechanism utilizes a spring to retain the stock while it is folded and a latch to secure the stock while it is extended. A recoil buffer can be fitted to the stock if necessary. The stock as mentioned before it independent from the trigger housing.
With is modularity, the system can go from 5.56 to 5.45 with a simple change of the trigger housing, bolt carrier group and also the barrel. Currently a 5.56, 5.45, 6.8 are scheduled for this version. A possible development of the 7.62x51 and 7.62 x 39 are in the future but with various project under work, MagPul has no time table to those calibers as of yet. The 5.45 trigger housing will have a thumb lever release without the bolt held open release, but the 5.56 and the future 6.8 will have the ambidextrous magazine release and also the bolt held open release. The bolt held open device is a lot like the XM8 or even the older FN FAL. It is right where your finger is at and it is easily manipulated.
Masada will be a piston driven unit, with the piston system as part of a self contain unit with the barrel. If you change the caliber, you do not have to worry about changing piston, each barrel will have its own piston much like the SCAR.
Here is an interesting part of the Masada. The trunnion has two harden steel rails riveted to it. Those two rails are then riveted into the aluminum receiver. The Bolt carrier travels on the steel rail to create a steel to steel interface. This interface yields the smoothest bolt travel in the industry. The design of the trunnion and the rail also ensure under heavy use, the heat transfer will not affect accuracy like what happened with the XM8. With the rail firmly secured to the receiver, it will make sure the trunnion will not be able to shift in the aluminum receiver under extreme heat.
The bolt carrier is much like the G36 or the SCAR. But the charging handle are interchangeable for right or left. A runner that secures the charging handle also locks into the bolt carrier to engage it for chambering a round or it can be used for malfunction clearance. The non-receptacle charging handle can be locked in to act as a forward assist.
A new rail system is also optional for those that require accessories to be attached to the Masada. The rail system retains the free float of the barrel and has sling swivel attachment points build in on both side.
MagPul has a few things to figure out like the recoil spring rate, piston setup, manufacturing process and sub-contractors. I think the more MagPul is having to answer calls and reply e-mails, the less time they would have to work on the rifle. They already know how well received this rifle has been, let's give them time to get this to the market.
Masada is a project that may grow larger then what MagPul can contain, this little monster that awe the show goers will no debut be the focus of may in the up coming year.
Here are some more photos of the gun taken during a trip to Colorado this past week.
战国时代-------------------SMGLee
2007 Shot Show kicked off the New Year with a bang from MagPul. The team of hard working crew at MagPul put together a new rifle within a 3 months time spam at the cost of less then 70k. The Masada was hit within the Law enforcement section, bring record crowd to the MagPul booth for the entire length of the show. Rich at MagPul will admit first that the new rifle are still a full year away from production and they will work to get it to the market unless a much larger company with more resources to take the project under their wings.
The Masada is only a code name, but this rifle not only brought a fresh air to the clustered AR market, but also show the capability of a smaller company to produce a weapon that can compete with the big boys with a budget that seem minuscule compare to the what some of the price it cost the military to bring in new weapon system. The Masada started with a machined aluminum receiver which is the serialized part. This machined receiver has a continuous rail that extends all the way to the integrated folding front sight. The front sight uses a standard M16 front post. The front sight deploys manually but requires a push of a button to fold it back down. Masada has what is in vogue right now, which is a quick change barrel with the capability for multiple calibers within one system. A harden barrel trunnion is at this time screwed into the receiver with interrupted threads much like what you would find on an artillery piece. This harden piece will ensure longevity with the barrel to trunnion interface under heavy use. The barrel of the Masada is a standard M4 affair, but with modified pieces to fit the quick change barrel locking collar and also the gas piston. In the production model, the Masada will feature an adjustable gas port where now an Allen screw resides for research to determine the proper gas port size.
Since the Masada receiver is the serialized part of the weapon, the lower trigger housing is a polymer non-impact component which contains the ambidextrous magazine release, bolt release and also the trigger group. The stock of the Masada is attached to the trigger housing by a captured pin. This method of componentry ensures the modularity of the weapon system. An operator can select a range of different stock option to best fit the mission perimeter. Currently a PRS style stock is part of the SPR offering. Back to the trigger housing, Rich and I discussed some of the short comings of the M16 selector and he stated the current selector design are something he is not satisfied with, it remain one of the biggest weak point of his Masada design. A future development of the selector will be forth coming to possibly alter the rotation of the selector to make it more ergonomic to the operator. The ability to incorporate the M16 trigger system means an operator in country can easily find trigger components such as pins and springs to supplement this weapon without having to find logistic in a remote battle field.
The Masada stock is nice touch with wide range of adjustability. The stock will fold much like the FN SCAR to reduce size for transport and also adjust for length of pull to best fit someone with armor. The cheek piece is also adjustable with two different heights. The folding mechanism utilizes a spring to retain the stock while it is folded and a latch to secure the stock while it is extended. A recoil buffer can be fitted to the stock if necessary. The stock as mentioned before it independent from the trigger housing.
With is modularity, the system can go from 5.56 to 5.45 with a simple change of the trigger housing, bolt carrier group and also the barrel. Currently a 5.56, 5.45, 6.8 are scheduled for this version. A possible development of the 7.62x51 and 7.62 x 39 are in the future but with various project under work, MagPul has no time table to those calibers as of yet. The 5.45 trigger housing will have a thumb lever release without the bolt held open release, but the 5.56 and the future 6.8 will have the ambidextrous magazine release and also the bolt held open release. The bolt held open device is a lot like the XM8 or even the older FN FAL. It is right where your finger is at and it is easily manipulated.
Masada will be a piston driven unit, with the piston system as part of a self contain unit with the barrel. If you change the caliber, you do not have to worry about changing piston, each barrel will have its own piston much like the SCAR.
Here is an interesting part of the Masada. The trunnion has two harden steel rails riveted to it. Those two rails are then riveted into the aluminum receiver. The Bolt carrier travels on the steel rail to create a steel to steel interface. This interface yields the smoothest bolt travel in the industry. The design of the trunnion and the rail also ensure under heavy use, the heat transfer will not affect accuracy like what happened with the XM8. With the rail firmly secured to the receiver, it will make sure the trunnion will not be able to shift in the aluminum receiver under extreme heat.
The bolt carrier is much like the G36 or the SCAR. But the charging handle are interchangeable for right or left. A runner that secures the charging handle also locks into the bolt carrier to engage it for chambering a round or it can be used for malfunction clearance. The non-receptacle charging handle can be locked in to act as a forward assist.
A new rail system is also optional for those that require accessories to be attached to the Masada. The rail system retains the free float of the barrel and has sling swivel attachment points build in on both side.
MagPul has a few things to figure out like the recoil spring rate, piston setup, manufacturing process and sub-contractors. I think the more MagPul is having to answer calls and reply e-mails, the less time they would have to work on the rifle. They already know how well received this rifle has been, let's give them time to get this to the market.
Masada is a project that may grow larger then what MagPul can contain, this little monster that awe the show goers will no debut be the focus of may in the up coming year.
Here are some more photos of the gun taken during a trip to Colorado this past week.
英文好的兄弟帮忙翻译下一楼的英文.........
还有.................
工艺很不错啊 有什么特点？
用软件翻的。。。凑合看下吧
2007 注射表演从 MagPul 砰地一声踢走新年。 MagPul 的辛苦工作组员的队然后在比较少量的费用在一个 3个月时间罐头火腿肉里面集合一把新的来福枪 70 k 。 Masada 在执法区段里面被打,为表演的整个长度带着记录群众到 MagPul 亭。 富有的在 MagPul 将会首先承认新的来福枪仍然是整年远离制造，而且他们将会工作让它到达市场除非和较多的资源一家非常大的公司轮流在他们的翅膀下面的计画。
Masada 只是一个密码名字，但是这一把来福枪不但带新鲜的空气去被聚集的 AR 市场 , 而且表示较小的公司能力生产一个能和有一个似乎草写小字的比较预算的大男孩竞争的武器到那它花费军队引进新的武器系统什么一些价格。 Masada 从一个被以机器制造的被写成连载长篇而刊登的部份铝接收器开始。这一个被以机器制造的接收器有一个扩充所有的路整合的折叠前面视力的连续栏杆。 前面的视力使用标准的 M16 前面职位。 前面的视力用手展开但是需要钮扣的推把它折叠回来向下的。Masada 有立刻是在时尚中的东西 , 一个快的变化是哪一在一个系统里面为多样的口径以能力快速前进。 一变硬炮耳在这进入有打断的线多相似的你会在火炮块上找的接收器之内被扭紧的次桶。 这变硬块将会用对在重的使用下面的炮耳接口的桶确定长命。 Masada 的桶是标准的 M4 事件, 但是由于修正的块适合快的变化桶锁定衣领以及瓦斯活塞。 在制造模型中， Masada 将会以一种可调整的瓦斯为特色港口哪里现在一个艾伦螺丝钉住让研究决定适当的瓦斯港口大小。
既然 Masada 接收器是武器的被写成连载长篇而刊登的部份，居住的较低板机是一个聚合体包含两手俱利的杂志释放的非冲击成份，门闩释放以及板机团体。 Masada 的存货被附上到被一个被捕获的大头针居住的板机。 componentry 的这一个方法确定武器系统的模组化。 一个操作员能选择对最好的适宜任务周长的多种不同的存货选项。 现在 PRS 风格存货是 SPR 提供的部份。 回到板机住屋, 富有的而且我讨论了 M16 选择者的一些短来临，而且他陈述现在的选择者设计是某事他不感到满意,它保持他的 Masada 设计的最大弱点之一。 选择者的将来发展将会往前受到的影响可能地改变选择者的旋转对操作员使它变成更工效学。合并 M16 板机系统的能力容易地意谓国家罐子的一个操作员发现板机成份 , 像是大头针和春天补充没有必须在一个遥远的战场中找起来后勤学者的这一个武器。
Masada 存货是有适应性的宽范围的美好触觉。 存货将会多像 FN 疤痕折叠对于传送减少大小以及调整因为长度拉到最好的适宜某人由于盔甲。 颊块也对二不同的高度感到可调整。 当它被折叠的时候，折叠的机制利用一个春天保有存货和一个门闩保护存货当它被延长的时候。 一个畏缩缓冲如果有需要的话能装配在存货。 在它前的依照提到的存货来自板机住屋的中立派。
由于是模组化,系统能以板机住屋的一个简单变化从 5.56 去到 5.45,闩住运送者团体以及桶。 现在一 5.56,5.45,6.8 被为这一个版本预定。 7.62 x51 和 7.62 x 39 的可能发展未来，但是由于在工作下面的各种不同的计画， MagPul 没有对那些口径的时间表当做然而。 5.45 板机住屋将会有一只拇指杠杆维持开着的释放没有门闩的释放，但是 5.56 和将来的 6.8 将会有两手俱利的杂志释放，以及门闩维持了开着的释放。 被维持开着的装置门闩很多像 XM8 或使～相等较旧的 FN FAL 。 资讯科技是权利哪里你的手指是在而且它容易地被操纵。
Masada 将会是一个活塞受到驱策的单位, 藉由活塞系统当部份一自己的用桶包含单位。 如果你改变口径,你不一定要有关变更活塞烦恼,每个桶将会有多像疤痕一样的它自己的活塞。
这里是 Masada 的一个有趣部份。 炮耳有二变硬被用铆钉固定到它的钢栏杆。 那二个栏杆然后进入铝接收器之内被用铆钉固定。 门闩运送者在钢的栏杆上旅行产生钢使接口坚如钢。 这一个接口产生工业的最平滑的门闩旅行。炮耳的设计和栏杆也在重的使用之下确定,热移动将不影响以 XM8 发生的准确性同类。 藉由栏杆坚固对接收器保护,它将会确定炮耳将会无法在极端的热之下在铝接收器中改变。
门闩运送者多像 G36 或疤痕。 但是要价柄对右边是可互换的或左边的。 一个也保护要价柄的跑步者进入门闩运送者之内锁为放在枪膛内一个回合答应它，否则它能作为故障清除。 要价柄的非容器能被锁在担任向前的帮助。
一个新的栏杆系统也对那些是可选择的以需要配件被附上到 Masada 。 栏杆系统保有桶的自由漂流物而且有投石器旋转附着点建立在两者的边上。
MagPul 有一些事物像畏缩一样理解春天率，活塞装备,制造程序和子承包商。 我认为，较多的 MagPul 是必须回答呼叫而且答复电子邮件, 比较少的时间他们会必须处理来福枪。 他们已经知道收到这一把来福枪已是多么的好, 使我们给他们时间把这给市场。
Masada 是一个然后可能变得比较大的计画什么 MagPul 能包含, 这一个小怪物敬畏表演行人将会没有初次登场是焦点在向上就要来的年中可能。
这里是再多一些这过去的一个星期在一次到科罗拉多的旅行期间被轮流的枪相片。
2007 注射表演从 MagPul 砰地一声踢走新年。 MagPul 的辛苦工作组员的队然后在比较少量的费用在一个 3个月时间罐头火腿肉里面集合一把新的来福枪 70 k 。 Masada 在执法区段里面被打,为表演的整个长度带着记录群众到 MagPul 亭。 富有的在 MagPul 将会首先承认新的来福枪仍然是整年远离制造，而且他们将会工作让它到达市场除非和较多的资源一家非常大的公司轮流在他们的翅膀下面的计画。
Masada 只是一个密码名字，但是这一把来福枪不但带新鲜的空气去被聚集的 AR 市场 , 而且表示较小的公司能力生产一个能和有一个似乎草写小字的比较预算的大男孩竞争的武器到那它花费军队引进新的武器系统什么一些价格。 Masada 从一个被以机器制造的被写成连载长篇而刊登的部份铝接收器开始。这一个被以机器制造的接收器有一个扩充所有的路整合的折叠前面视力的连续栏杆。 前面的视力使用标准的 M16 前面职位。 前面的视力用手展开但是需要钮扣的推把它折叠回来向下的。Masada 有立刻是在时尚中的东西 , 一个快的变化是哪一在一个系统里面为多样的口径以能力快速前进。 一变硬炮耳在这进入有打断的线多相似的你会在火炮块上找的接收器之内被扭紧的次桶。 这变硬块将会用对在重的使用下面的炮耳接口的桶确定长命。 Masada 的桶是标准的 M4 事件, 但是由于修正的块适合快的变化桶锁定衣领以及瓦斯活塞。 在制造模型中， Masada 将会以一种可调整的瓦斯为特色港口哪里现在一个艾伦螺丝钉住让研究决定适当的瓦斯港口大小。
既然 Masada 接收器是武器的被写成连载长篇而刊登的部份，居住的较低板机是一个聚合体包含两手俱利的杂志释放的非冲击成份，门闩释放以及板机团体。 Masada 的存货被附上到被一个被捕获的大头针居住的板机。 componentry 的这一个方法确定武器系统的模组化。 一个操作员能选择对最好的适宜任务周长的多种不同的存货选项。 现在 PRS 风格存货是 SPR 提供的部份。 回到板机住屋, 富有的而且我讨论了 M16 选择者的一些短来临，而且他陈述现在的选择者设计是某事他不感到满意,它保持他的 Masada 设计的最大弱点之一。 选择者的将来发展将会往前受到的影响可能地改变选择者的旋转对操作员使它变成更工效学。合并 M16 板机系统的能力容易地意谓国家罐子的一个操作员发现板机成份 , 像是大头针和春天补充没有必须在一个遥远的战场中找起来后勤学者的这一个武器。
Masada 存货是有适应性的宽范围的美好触觉。 存货将会多像 FN 疤痕折叠对于传送减少大小以及调整因为长度拉到最好的适宜某人由于盔甲。 颊块也对二不同的高度感到可调整。 当它被折叠的时候，折叠的机制利用一个春天保有存货和一个门闩保护存货当它被延长的时候。 一个畏缩缓冲如果有需要的话能装配在存货。 在它前的依照提到的存货来自板机住屋的中立派。
由于是模组化,系统能以板机住屋的一个简单变化从 5.56 去到 5.45,闩住运送者团体以及桶。 现在一 5.56,5.45,6.8 被为这一个版本预定。 7.62 x51 和 7.62 x 39 的可能发展未来，但是由于在工作下面的各种不同的计画， MagPul 没有对那些口径的时间表当做然而。 5.45 板机住屋将会有一只拇指杠杆维持开着的释放没有门闩的释放，但是 5.56 和将来的 6.8 将会有两手俱利的杂志释放，以及门闩维持了开着的释放。 被维持开着的装置门闩很多像 XM8 或使～相等较旧的 FN FAL 。 资讯科技是权利哪里你的手指是在而且它容易地被操纵。
Masada 将会是一个活塞受到驱策的单位, 藉由活塞系统当部份一自己的用桶包含单位。 如果你改变口径,你不一定要有关变更活塞烦恼,每个桶将会有多像疤痕一样的它自己的活塞。
这里是 Masada 的一个有趣部份。 炮耳有二变硬被用铆钉固定到它的钢栏杆。 那二个栏杆然后进入铝接收器之内被用铆钉固定。 门闩运送者在钢的栏杆上旅行产生钢使接口坚如钢。 这一个接口产生工业的最平滑的门闩旅行。炮耳的设计和栏杆也在重的使用之下确定,热移动将不影响以 XM8 发生的准确性同类。 藉由栏杆坚固对接收器保护,它将会确定炮耳将会无法在极端的热之下在铝接收器中改变。
门闩运送者多像 G36 或疤痕。 但是要价柄对右边是可互换的或左边的。 一个也保护要价柄的跑步者进入门闩运送者之内锁为放在枪膛内一个回合答应它，否则它能作为故障清除。 要价柄的非容器能被锁在担任向前的帮助。
一个新的栏杆系统也对那些是可选择的以需要配件被附上到 Masada 。 栏杆系统保有桶的自由漂流物而且有投石器旋转附着点建立在两者的边上。
MagPul 有一些事物像畏缩一样理解春天率，活塞装备,制造程序和子承包商。 我认为，较多的 MagPul 是必须回答呼叫而且答复电子邮件, 比较少的时间他们会必须处理来福枪。 他们已经知道收到这一把来福枪已是多么的好, 使我们给他们时间把这给市场。
Masada 是一个然后可能变得比较大的计画什么 MagPul 能包含, 这一个小怪物敬畏表演行人将会没有初次登场是焦点在向上就要来的年中可能。
这里是再多一些这过去的一个星期在一次到科罗拉多的旅行期间被轮流的枪相片。
LS狂汗:L
怎么看，活塞也不能从前面卸下来，难道清理活塞积碳必须要拆枪管？
SHOTSHOW 被翻成 [注射表演] 强！！！
;P ;P ;P
;P ;P ;P
]]
http://www.youtube.com/watch?v=UaYOI1waCYI
再给大家看个视频！
再给大家看个视频！
好东西!
刚刚在老外的网站上找到的新图！
还有！
继续啊！
最近这枪挺上镜头的！
经典啊！～
好枪啊！
好枪啊！
方机框03