喂喂,这个世界怎么这么喜欢多此一举的事情?

来源:百度文库 编辑:超级军网 时间:2024/03/29 05:55:18


美国再次放宽对华高技术产品出口 65nm以下刻蚀设备不再受限

在SEMI及会员公司的共同努力下,经过9个月的等待,美国联邦政府正式实施放宽刻蚀设备的出口条件,原来180nm的技术审核指标被正式放宽到了65nm。

After nearly nine months of waiting, the export control requirements for etch equipment and cluster tools have been reduced as a result of SEMI’s public policy work. Each year SEMI works closely with member companies to push for improvements to the export control list maintained by the multilateral Wassenaar Arrangement as part of their annual list review. The most recent proposals were agreed to in December 2009, but only implemented by the U.S federal government as of September 7, 2010.

Because of these newly implemented regulations, the control for etch equipment will no longer apply to equipment above 65 nanometers rather than the previous control level of 180 nanometers.  The control for cluster tools has been narrowed to only apply when two or more functionally different semiconductor process tools are used. Each of these new regulations is the result of several years of discussion between government and industry. They are good examples of the value of working together to improve the control list while reducing unnecessary burdens on exporters.

SEMI continues to be active in not only working on reforming the specific regulations that govern export control, but also working to ensure that our industry is given strong consideration as the federal government works to reform the overall the export control system.

其实之前有UAE资格的中国用户都已经用上N久了:L

For more information on export control issues, please contact Maggie Hershey at mhershey@semi.org.

~~~~~~~~~~~~~~~~~~~~~~~~~

再来个消息,观海同志要卖我们C130?

The White House

Office of the Press Secretary
For Immediate Release
October 08, 2010

Letter from the President Regarding an Export Waiver for China

TEXT OF A LETTER FROM THE PRESIDENT
TO THE SPEAKER OF THE HOUSE OF REPRESENTATIVES
AND THE PRESIDENT OF THE SENATE

Dear Madam Speaker:  (Dear Mr. President:)

Pursuant to the authority vested in me by section 902(b)(2) of the Foreign Relations Authorization Act, Fiscal Years 1990 and 1991 (Public Law 101-246)(the "Act"), and as President of the United States, I hereby report to the Congress that it is in the national interest of the United States to terminate the suspensions under section 902(a)(3) of the Act with respect to the issuance of temporary munitions export licenses for exports to the People's Republic of China insofar as such restrictions pertain to the C-130 cargo aircraft to be used in oil spill response operations at sea.  License requirements remain in place for these exports and require review and approval on a case-by-case basis by the United States Government.

Sincerely,
BARACK OBAMA

~~~~~~~~~~~~~~
为什么不是C17呢?

美国再次放宽对华高技术产品出口 65nm以下刻蚀设备不再受限

在SEMI及会员公司的共同努力下,经过9个月的等待,美国联邦政府正式实施放宽刻蚀设备的出口条件,原来180nm的技术审核指标被正式放宽到了65nm。

After nearly nine months of waiting, the export control requirements for etch equipment and cluster tools have been reduced as a result of SEMI’s public policy work. Each year SEMI works closely with member companies to push for improvements to the export control list maintained by the multilateral Wassenaar Arrangement as part of their annual list review. The most recent proposals were agreed to in December 2009, but only implemented by the U.S federal government as of September 7, 2010.

Because of these newly implemented regulations, the control for etch equipment will no longer apply to equipment above 65 nanometers rather than the previous control level of 180 nanometers.  The control for cluster tools has been narrowed to only apply when two or more functionally different semiconductor process tools are used. Each of these new regulations is the result of several years of discussion between government and industry. They are good examples of the value of working together to improve the control list while reducing unnecessary burdens on exporters.

SEMI continues to be active in not only working on reforming the specific regulations that govern export control, but also working to ensure that our industry is given strong consideration as the federal government works to reform the overall the export control system.

其实之前有UAE资格的中国用户都已经用上N久了:L

For more information on export control issues, please contact Maggie Hershey at mhershey@semi.org.

~~~~~~~~~~~~~~~~~~~~~~~~~

再来个消息,观海同志要卖我们C130?

The White House

Office of the Press Secretary
For Immediate Release
October 08, 2010

Letter from the President Regarding an Export Waiver for China

TEXT OF A LETTER FROM THE PRESIDENT
TO THE SPEAKER OF THE HOUSE OF REPRESENTATIVES
AND THE PRESIDENT OF THE SENATE

Dear Madam Speaker:  (Dear Mr. President:)

Pursuant to the authority vested in me by section 902(b)(2) of the Foreign Relations Authorization Act, Fiscal Years 1990 and 1991 (Public Law 101-246)(the "Act"), and as President of the United States, I hereby report to the Congress that it is in the national interest of the United States to terminate the suspensions under section 902(a)(3) of the Act with respect to the issuance of temporary munitions export licenses for exports to the People's Republic of China insofar as such restrictions pertain to the C-130 cargo aircraft to be used in oil spill response operations at sea.  License requirements remain in place for these exports and require review and approval on a case-by-case basis by the United States Government.

Sincerely,
BARACK OBAMA

~~~~~~~~~~~~~~
为什么不是C17呢?
这这这这。。。。。。
姿态而已...演给世界上不明真相的群众看的...群众又不了解他曾经做过什么,只会听他宣传现在在做什么...
混蛋,要卖直接卖全套工业生产线顺便训练人员,要这个干嘛?
老娘表示C17神马的都是浮云……云……
炸药和平奖大棒之后,给个棒棒糖安慰一下,或许是对影帝表态的犒赏·······
EVAF 发表于 2010-10-10 08:49

说真的,一个XX奖算毛的大棒。
至于C-130。。。。。。还是把发动机打包卖过来算了。。。。。。
回复 7# racher
以这种方式加以否定,对中国来说效果不比贸易制裁啥的差
发动机?基础工业就那样,卖了又有啥用·····
EVAF 发表于 2010-10-10 10:29

这样否定。。。。。又不是第一次了,达赖喇嘛都能提名和平奖。。。。。
这连半点大棒都算不上。。。。。。

至于发动机还是有点价值的,工业基础,还不是靠钱和时间堆出来的,只不过C-130,看不出什么太大的购买价值,啊,当然大家可以说美国人的态度云云。
无敌的猫猫 发表于 2010-10-10 08:22

敲碗要求C-5的全套生产线……
回复 9# racher
在西方眼中,达赖几乎就是甘地,提他也不奇怪。
这个话题敏感,不说为好。
EVAF 发表于 2010-10-10 11:55


    甘地也不是啥好货色
LPC2103 发表于 2010-10-10 12:15


    人妻群睡
猫失前爪 发表于 2010-10-10 13:01


人家是肾雄甘地,你的明白?{:jian:}
要MC-130,要C-130J,要AC-130
回复 15# sunbamboo124

我要EC130和HC130
一牧月 发表于 2010-10-10 13:43


    还喜欢搞心战……政战人才啊
敲碗要C-130J…………等等这里不是空版啊(抬头)
话说,C130比运8有多大优势?
回复 19# jiandingzhe


    最新的C130J还可以,换了发动机,螺旋桨换成复合材料的六叶,货舱加长,能运更多散货,

但问题是不知道中国还有相关的后勤配套没有
回复 5# 无敌的猫猫


    TG大运??????????
damo56030 发表于 2010-10-10 16:00

可是最新的运8,不也改进一大堆么……
回复 22# jiandingzhe


    是啊,也许真买来民用?[:a3:]
蜜月期的时候就买过3架民用型的,没什么稀奇的。2001年退役了。

1.jpg

2.jpg

3.jpg
不过当时买的是L-100民用衍生型,虽然名字也是“大力神”但代号并非C-130。
没看65NM以上的刻蚀设备不需米帝的“有关部门”审批么?我倒觉得这比C130有点意义,虽然还是有点鸡肋
Wassenaar Arrangement依旧威武
干嘛非要在乎老美放宽对华高技术XXX出口呢,自己没那志气搞么?;P
东亚人 发表于 2010-10-10 22:46


    本帖的目的在于吐槽美国人的蛋疼
干刻蚀没做过……不过想必以后至少Parts会来得比以前快了吧……
yigua 发表于 2010-10-10 15:42
88区是非常能体现有容乃大的地方
BTW在一个主题下并行不悖展开二到三个毫不相干的讨论也是88区光荣传统{:qiliang:}
yigua 发表于 2010-10-10 15:42


    空版最近有点烦…@+@…
一牧月 发表于 2010-10-11 00:57


    人家是88区的元老了…比你我都资深…
回复 30# sunbamboo124


    一直做湿法的?
回复 33# 博丽灵梦
以前翻老贴时似乎有点印象。说起来AVFUN我早先的早先就是从88区这里链接过去的{:qiliang:}

空版最近有点烦…@+@…
博丽灵梦 发表于 2010-10-11 01:02

空版@¥#^£
空版最近有点烦…@+@…
博丽灵梦 发表于 2010-10-11 01:02

空版@¥#^£
博丽灵梦 发表于 2010-10-11 01:06


    湿的干过一点……Track干过一点……现在在CVD的火坑里
sunbamboo124 发表于 2010-10-11 08:44

兄弟现在在哪?
chinatemplar 发表于 2010-10-11 13:23


    干薄膜太阳能,在南昌……悲剧的行当和地方
sunbamboo124 发表于 2010-10-11 13:25

太阳能还好吧
至少现在最早投身太阳能的人都赚到了
南昌不了解...